Vacuum pump oil, BECKER, BUSCH RIETSCHLE


The equipment used in the art for removing gases (evacuation) in a confined space. The pump is divided in its mechanism of action to:
volumetric jet, ion adsorption, ion magnetic molecular condensation, adsorption and ion.


The most important parameters of vacuum pumps:


final pressure (lowest pressure that can get the pump)
pumping speed and the dependence of the rate of pressure
capacity (usually measured in m3 discharge of the pump per unit time).

Vane – oil-free – Oil-free rotary vacuum pumps

Simplicity, only one shaft and direct transfer of drive – vacuum pumps, characterized by low costs of operation and maintenance. These pumps operate at 100% oil-free. They are equipped with graphite blades for long life, integrated air filter and control valves. This ensures seamless interoperability with additional accessories. Integrated air cooler ensures a low temperature of the air on exhalation. The compact design provides low noise and low heat emission. Optional corrosion protection makes these pumps suitable for operation in the presence of humid air.

Lobe vacuum pumps Mink

Lobe vacuum pumps Busch Mink offer the highest efficiency of vacuum for industrial use, consistent performance, and minimal maintenance requirements. Series MM MM 1324 AV 1322 AV is produced four sizes lobowych Mink vacuum pumps.
The entire series includes Mink lobe vacuum pumps with pumping speeds from 40 to 1000 m³ / h.

With the advanced technology of vacuum lobe pump Mink achieve very high levels of efficiency, which has a positive effect on energy consumption and efficiency. In practice this means savings in energy costs up to 60% compared with the conventional vacuum technology while providing the same pumping speed.

An additional advantage of the vacuum technology lobe is non-contact method of operation: no moving parts inside the vacuum pump is not in contact with another such that they do not wear out, and the device requires virtually no maintenance during operation.

Such maintenance work, such as checking and replacement of parts, have been completely eliminated. Thanks to the dry completely compression, niewymagającemu fluids in the compression chamber has eliminated the costs associated with their purchase, delivery or disposal. Mink lobe vacuum pumps are air-cooled.

The high level of reliability and long service life of vacuum pumps Mink is another advantage of compression contactless, requiring no fluids. Since there is practically no wear parts, performance vacuum and suction remains constant, high level throughout the lifetime of the device. The use of intelligent damper yielded quiet operation of the pump.

Vacuum pumps single-stage water ring LEMA, SPECK PUMPEN, SIHI (water jacket)

for pumping gases and vacuum or pressure.

These pumps are used in a variety of applications in many industries. Particularly useful where it is possible to suck different kinds of aggressive substances such as .: wood dryers.

Vacuum pumps single-stage water ring for gas handling and vacuum or pressure.

These pumps are used in a variety of applications in many industries. Particularly useful where it is possible to suck different kinds of aggressive substances such as .: wood dryers.

The most important advantages offered pumps include:

  • The high quality and reliability with a simple and compact design.
  • It allows forcing the majority of gases, incluThe only movable part of the pump impeller.ding mixtures of gases and liquids, eg. Highly humid air.
  • Compression pump is a isothermal
  • The only movable part of the pump impeller.
  • Working without oil – operation and maintenance are minimized, environmentally friendly
  • Low noise and low vibration level.

Vacuum pump oil, BECKER, BUSCH RIETSCHLE

The equipment used in the art for removing gases (evacuation) in a confined space. The pump is divided in its mechanism of action to:
volumetric jet, ion adsorption, ion magnetic molecular condensation, adsorption and ion.

The most important parameters of vacuum pumps:

final pressure (lowest pressure that can get the pump)
pumping speed and the dependence of the rate of pressure
capacity (usually measured in m3 discharge of the pump per unit time).

Vane – oil-free – Oil-free rotary vacuum pumps

Simplicity, only one shaft and direct transfer of drive – vacuum pumps, characterized by low costs of operation and maintenance. These pumps operate at 100% oil-free. They are equipped with graphite blades for long life, integrated air filter and control valves. This ensures seamless interoperability with additional accessories. Integrated air cooler ensures a low temperature of the air on exhalation. The compact design provides low noise and low heat emission. Optional corrosion protection makes these pumps suitable for operation in the presence of humid air.

Lobe vacuum pumps Mink

Lobe vacuum pumps Busch Mink offer the highest efficiency of vacuum for industrial use, consistent performance, and minimal maintenance requirements. Series MM MM 1324 AV 1322 AV is produced four sizes lobowych Mink vacuum pumps.
The entire series includes Mink lobe vacuum pumps with pumping speeds from 40 to 1000 m³ / h.

With the advanced technology of vacuum lobe pump Mink achieve very high levels of efficiency, which has a positive effect on energy consumption and efficiency. In practice this means savings in energy costs up to 60% compared with the conventional vacuum technology while providing the same pumping speed.

An additional advantage of the vacuum technology lobe is non-contact method of operation: no moving parts inside the vacuum pump is not in contact with another such that they do not wear out, and the device requires virtually no maintenance during operation.

Such maintenance work, such as checking and replacement of parts, have been completely eliminated. Thanks to the dry completely compression, niewymagającemu fluids in the compression chamber has eliminated the costs associated with their purchase, delivery or disposal. Mink lobe vacuum pumps are air-cooled.

The high level of reliability and long service life of vacuum pumps Mink is another advantage of compression contactless, requiring no fluids. Since there is practically no wear parts, performance vacuum and suction remains constant, high level throughout the lifetime of the device. The use of intelligent damper yielded quiet operation of the pump.

Vacuum pumps single-stage water ring LEMA, SPECK PUMPEN, SIHI (water jacket)

for pumping gases and vacuum or pressure.

These pumps are used in a variety of applications in many industries. Particularly useful where it is possible to suck different kinds of aggressive substances such as .: wood dryers.

Vacuum pumps single-stage water ring for gas handling and vacuum or pressure.

These pumps are used in a variety of applications in many industries. Particularly useful where it is possible to suck different kinds of aggressive substances such as .: wood dryers.

The most important advantages offered pumps include:

  • The high quality and reliability with a simple and compact design.
  • It allows forcing the majority of gases, incluThe only movable part of the pump impeller.ding mixtures of gases and liquids, eg. Highly humid air.
  • Compression pump is a isothermal
  • The only movable part of the pump impeller.
  • Working without oil – operation and maintenance are minimized, environmentally friendly
  • Low noise and low vibration level.

Vacuum pump oil, BECKER, BUSCH RIETSCHLE

The equipment used in the art for removing gases (evacuation) in a confined space. The pump is divided in its mechanism of action to:
volumetric jet, ion adsorption, ion magnetic molecular condensation, adsorption and ion.

The most important parameters of vacuum pumps:

final pressure (lowest pressure that can get the pump)
pumping speed and the dependence of the rate of pressure
capacity (usually measured in m3 discharge of the pump per unit time).

Vane – oil-free – Oil-free rotary vacuum pumps

Simplicity, only one shaft and direct transfer of drive – vacuum pumps, characterized by low costs of operation and maintenance. These pumps operate at 100% oil-free. They are equipped with graphite blades for long life, integrated air filter and control valves. This ensures seamless interoperability with additional accessories. Integrated air cooler ensures a low temperature of the air on exhalation. The compact design provides low noise and low heat emission. Optional corrosion protection makes these pumps suitable for operation in the presence of humid air.

Lobe vacuum pumps Mink

Lobe vacuum pumps Busch Mink offer the highest efficiency of vacuum for industrial use, consistent performance, and minimal maintenance requirements. Series MM MM 1324 AV 1322 AV is produced four sizes lobowych Mink vacuum pumps.
The entire series includes Mink lobe vacuum pumps with pumping speeds from 40 to 1000 m³ / h.

With the advanced technology of vacuum lobe pump Mink achieve very high levels of efficiency, which has a positive effect on energy consumption and efficiency. In practice this means savings in energy costs up to 60% compared with the conventional vacuum technology while providing the same pumping speed.

An additional advantage of the vacuum technology lobe is non-contact method of operation: no moving parts inside the vacuum pump is not in contact with another such that they do not wear out, and the device requires virtually no maintenance during operation.

Such maintenance work, such as checking and replacement of parts, have been completely eliminated. Thanks to the dry completely compression, niewymagającemu fluids in the compression chamber has eliminated the costs associated with their purchase, delivery or disposal. Mink lobe vacuum pumps are air-cooled.

The high level of reliability and long service life of vacuum pumps Mink is another advantage of compression contactless, requiring no fluids. Since there is practically no wear parts, performance vacuum and suction remains constant, high level throughout the lifetime of the device. The use of intelligent damper yielded quiet operation of the pump.

Vacuum pumps single-stage water ring LEMA, SPECK PUMPEN, SIHI (water jacket)

for pumping gases and vacuum or pressure.

These pumps are used in a variety of applications in many industries. Particularly useful where it is possible to suck different kinds of aggressive substances such as .: wood dryers.

Vacuum pumps single-stage water ring for gas handling and vacuum or pressure.

These pumps are used in a variety of applications in many industries. Particularly useful where it is possible to suck different kinds of aggressive substances such as .: wood dryers.

The most important advantages offered pumps include:

  • The high quality and reliability with a simple and compact design.
  • It allows forcing the majority of gases, incluThe only movable part of the pump impeller.ding mixtures of gases and liquids, eg. Highly humid air.
  • Compression pump is a isothermal
  • The only movable part of the pump impeller.
  • Working without oil – operation and maintenance are minimized, environmentally friendly
  • Low noise and low vibration level.
[:]